Filter
Top Products
18 - English
Battery Features
Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can
recharge the battery by connecting it to 120 VAC power through the AC adapter.
Install and Charge the Battery
See page 5 for details on installing and charging the battery (the same procedures as for
initial turnup).
Remove the Battery
1. Press down on the battery latch to release the battery.
2. With the battery latch pressed down, press down and push out the opposite end of the
battery to slide it out of the battery compartment.
Check the Battery Level
Press the battery indicator button while the AC adapter is not connected to your speaker
(see page 8). The battery LEDs light according to how much power remains in the battery:
• 3 LEDs = 100 - 70% remaining
• 2 LEDs = 70 - 35% remaining
• 1 LED = 35 - 15% remaining