Filter
Top Products
13
EARPHONE INSER
TION - “ROCK N’ ROLL”
It is important to get a good ear fit when inserting these earphones to
maximize comfort and optimize the listening experience. A correct seal
will help eliminate background noise and offer the best frequency
response when listening to music.
ƽ Be sure that the volume is turned down to a
minimum on the device that you will be using.
Next, plug your earphones into the output. (Note: if
you are using an unstable sound device please see
page 16 for Using the Sound Level Attenuator).
STEP 1
Identify the left earphone (marked with an “L”) and the
right earphone (marked with an “R”). Holding each
earphone with the cord pointing straight up and against
your head, gently glide the ear tip into the ear canal.
STEP 2
Keeping your earphones in the same position, rock your
hands slightly forward to slide the ear tip comfortably
into the ear canal.
STEP 3
Now, gently roll your earphones back to create the seal
desired. (Note: if you are having difficulty please see
page 17 for Suggestions for Using Ear Tips).
Volume
Low
Medium
High