Filter
Top Products
17
PREPARATION
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory. Once the storing is finished, you can select a desired
channel using
CH/TRK
.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 12).
• Press
I.SELECT
so that the channel number will appear if “L1 / L2”( For W-528/W-522 only ) or
”L”( For W-422 only) is displayed in the VCR display.
Incoming Antenna/Cable(CATV) Signals
1
Press
PROG
. to display the MENU screen.
2
Select “PRESET” using
FF
or
REW
,
and press
ENTER
.
3
Select “CH MEMORY” using
PLAY
or
STOP
, and press
ENTER
.
4
Set “TV/CATV“ to “TV” or “CATV” using
FF
or
REW
.
TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.
5
Select “AUTO SCAN” using
PLAY
or
STOP
, and press
FF
to set to “ON”.
The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.
6
Press
PROG.
twice to exit.
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
A.SELECT
ENTER
STOP
FF
REW
PLAY
REW
FF
PLAY, STO
P
1,6
ENTER
1
2
3
6
5
4
9
87
0
I.SELECT
100
100
Number
buttons
PREPARATION
Storing Channels on the VCR
This section is required if you receive only normal TV or unscrambled cable channels.
W-528 522 422 eng (11-19) 2/28/02, 2:29 PM17