Filter
Top Products
85
Mobile Computing
Using battery alarms
5.375 x 8.375 ver 2.3.2
Using a hot key to select the power usage mode
1 Press Fn and F2 simultaneously to display the power usage
pop-up window.
2 While continuing to press
Fn, press F2 until you select the
desired power usage mode.
3 Release the
Fn key.
The computer is now in the selected mode.
Using battery alarms
You can configure the computer to warn you when the main
battery is running low.
Setting battery alarms
You can set two alarms. Each alarm can be set to alert you
when a specified percentage of remaining battery power has
been reached. You can set how the warning occurs: sound an
alarm, display a message, both, or none. You can also set the
computer to enter Standby mode or Hibernation mode or to
completely power down when the alarm goes off.
To set an alarm or alarms:
1 Click Start, Control Panel.
2 Click Performance and Maintenance.
3 Click Toshiba Power Saver.
The Toshiba Power Saver Properties window appears.
4 In the “Running on batteries” section, click Details.
The mode Properties window appears.
5 Click the Alarm tab and set the alarm(s), as desired.