Filter
Top Products
Printed in Japan
133-05-385-40
14.2. Extension Plate SR-EP4 (optional)
The SR-EP4 is used to join multiple SR-S4L or SR-S4S speakers. One complete set consists of 2 brackets.
14.3. Protection Pad SR-PP4 (optional)
When the SR-S4L or SR-S4S speaker is installed so that its bottom edge is located at head height, people
could bump their heads directly against the speaker and suffer injuries. Affixing this protection pad to the
speaker's bottom surface helps reduce the impact and chance of injury.
• Accessories
Hexagon head bolt M5 x 20 with washer .......... 16
Note: The design and specifications are subject to change without notice for improvement.
Note: The design and specifications are subject to change without notice for improvement.
Number of Speaker to be Jointed Max. 3 (when using 2 sets of SR-EP4)
Finish Steel plate, white, paint
Dimensions 140 (w) x 220 (h) x 2.3 (t) mm
Weight 1.1 kg (including accessories)
Finish Synthetic rubber, black
Dimensions 168 (w) x 59 (d) x 8 (t) mm
Weight 40 g