Filter
Top Products
11
Use the supplied rack mounting bracket when mounting the unit in a standard 19" equipment rack (2 unit
size).
Step 1. Remove four M4 x 8 screws on the sides.
The removed screws are no longer used.
Step 2. Attach the rack mounting bracket to the unit using the supplied four M4 x 16 bracket mounting screws.
Rack mounting bracket
(accessory)
Screws removed in Step 1 are no longer used.
Bracket mounting screw M4 x 16 (accessory)
Notes
• Remove 4 plastic feet on the bottom surface when mounting the unit in a rack.
• Rack mounting screws are not supplied with the unit. Use the screws that are appropriate for the rack.
• When mounting the unit in an equipment rack, the inside of the rack must be sufficiently ventilated.
To achieve sufficient ventilation, also mount TOA's Perforated Panels (1U* or 2U):
(1) at the top and the bottom of the rack, and
(2) above and below the unit.
* 1U size = 44.5 mm or 1.75" (reference size)
9. RACK MOUNTING BRACKET ATTACHMENT
Perforated panel
Perforated panel
P-9060DH/9120DH
Perforated panel
P-9060DH/9120DH
Perforated panel
P-9060DH/9120DH
Perforated panel