Filter
Top Products
8
Step 3. Reposition the 4 bolts to the desired directivity angle, then retighten them securely.
The sound coverage area can also be made asymmetrical by shifting the position of each bolt to
different directivity angle.
Step 4. Reposition the speaker system by turning it upside down. Then, tighten the 2 bolts loosened in step 1.
Observe the following instructions to tighten the bolts securely.
Failure to do this could cause the speaker to fall, potentially
resulting in damage and/or personal injury.
• Ensure that each bolt is correctly inserted into its slot before
tightening it.
• Bolts can be tightened using either a Phillips screwdriver or a
wrench, but be sure to finish the tightening with the wrench to
ensure optimum tightness.
WARNING
15° mode
Example of independent
angle adjustment
[60° mode (factory-preset)]
Angle adjustment section
60° mode
45° mode30° mode
15° mode