Filter
Top Products
7
Step 4. Attach a safety wire to prevent the speaker from accidentally falling.
To attach, tie one end of the supplied
safety wire around the speaker's safety
wire hook, and tie its snap ring around
a secure C-channel bar or anchor bolt
in the ceiling.
Safety wire hook
Safety wire
(accessory)
Secure C-channel bar or
anchor bolt in the ceiling
Speaker unit
Step 5. Plug the detachable input connector into the speaker's
wiring socket.
Detachable input
connector
Speaker unit
Step 6. Mount the speaker.
Caution
Before mounting, check to be sure that the speaker's
4 mounting tabs are turned inside the unit as shown in
the figure.
If turned outward, the speaker cannot be inserted
through the mounting hole.
In
Out
Mounting tab
6-1. Insert the speaker through the mounting hole till it contacts the ceiling panel.
While doing so, avoid directly touching the speaker's
diaphragm and tweeter.
WARNING
Never grab the tweeter section as a hand hold.
The speaker could fall due to damage, resulting
in possible personal injury.
Tweeter section
Tweeter section
Mounting hole