Filter
Top Products
6
General Installation…
Set up the Transmitter
1.
Power the Transmitter;
In the base of the
transmitter, remove the
cover plate and insert
3
x AA batteries to power
the transmitter.
2.
Check the “Green” LED
light is on showing the
transmitter has power.
3.
Connect the transmitter
to an Audio Source
using either the 3.5mm
jack or 2x phono/ RCA
type
red & white
plugs
supplied.
Note
:
The TIC
WRS010 is
capable of working with the “Audio Output” of many
different sound sources.
The 3.5mm to 3.5mm jack cable supplied
connects to
many different audio sources including CD’s, MP3’s Ipod’s etc. The 3.5mm jack
to 2x phono/ RCA type red & white plugs supplied co
nnects to many devices
through the “audio out” function of devices like TV’s, DVD’s and receiver
amplifiers.
Note
: It is possible that the supplied, packaged batteries have lost their charge
during the shipping process. Please replace before troubleshooti
ng.
Set up the Wireless Rock Speakers
1.
Carefully unpack, tilt on their side, and look carefully at the base of your
new TIC wireless rock speakers.
2.
Note first the 110v mains connection input on the base plate, covered by