Filter
Top Products
Selecting Tape Player
Press SOURCE on the main unit or TAPE on the
remote control to select tape mode.
Playing a Tape
1. In tape mode, press on the cassette door to
open it.
2. Insert a tape into the door and push the door
closed.
3. Press SKIP BACKWARD / SKIP
FORWARD to position the tape to the
desired starting position.
4. Press PLAY to begin playback.
5. Press PAUSE to pause playback.
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG/SET to reset.
Recording
From Tuner
1. Insert a tape into deck.
2. Press SOURCE repeatedly on the main unit or
TUNER on the remote control to select Tuner .
3. Press BAND to access the desired radio band.
4. Press SKIP BACKWARD or SKIP
FORWARD to tune to the station to be
recorded.
5. Press RECORD to begin recording.
6. press STOP to end recording.
From CD
1. Insert a tape into deck .
2. Press SOURCE repeatedly on the main unit to
select CD then press DISC SKIP on the remote
control or DISC1 / DISC2 / DISC 3 / DISC 4
/ DISC 5 on the main unit to select the disc to
be recorded.
3. Press SKIP BACKWARD or SKIP
FORWARD to select the track to be
recorded.
or
Press PROG/SET to enter program mode.
4. Press RECORD to begin recording.
5. press STOP to end recording.
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on
the back of the system.
3. Start playback on the auxiliary device.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
15
EN
Tape Player
MS4200 EN 2/3/04 9:54 AM Page 20