Filter
Top Products
Showing Demonstration
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press PRESET - or PRESET + to set
the hour and then press CLOCK to shift to
minute digits.
3. Press PRESET - or PRESET + to set
the minute.
4. Press PROG/SET to save settings and STOP
to quit setting.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press PRESET - or
PRESET + on the main unit or PRESET
FOLDER or on the remote control to
set the hour and then press TIMER to shift to
minute digits.
3. Press PRESET - or PRESET + on the
main unit or PRESET FOLDER or on
the remote control to set the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press PRESET -
or PRESET + on the main unit or
PRESET FOLDER or on the remote
control to select between CD / TUNER /
TAPE / REC TU.
If REC TU is selected, select the preset station
by pressing PRESET - or PRESET + on
the main unit or PRESET FOLDER or
on the remote control.
6. Press TIMER to set volume. Adjust VOLUME
control to select desired volume level.
7. Press PROG/SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the timer.
The timer icon is displayed when timer is
activated.
7
EN
Settings
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
MS4200 EN 2/3/04 9:54 AM Page 12