Filter
Top Products
Getting Started
EN
5
Digital Connections
Read instructions carefully when connecting
components to the receiver.
Digital In Jacks can accept Dolby Digital (AC-3) or PCM
signals when compatible components are
connected.
TV Connections
TVs with RF input may need a RF modulator (not
included) for inputting audio / video signals.
Connecting the Antennas
The AM and FM antennas connect to the AM and FM
terminals on the system’s back panel.
They must be hooked up in order to receive clear
reception.
AM Loop Antenna and FM Indoor Antenna
1. Uncoil the Antenna wire and locate the base end of
the AM antenna.
2. Press down on the Antenna tab to open the terminal.
3. Inert the antenna wires into the terminal and release
the tabs to secure the wires in place.
FM 75‰
3‰
FR FL
SR
SL
CEN
SUB
6‰
SPEAKERS
SUBWOOFER
PRE OUT
IN
OUT
IN
AUDIO
VIDEO
L
R
DVD SAT
TV
VCR
CD
TAPE
DIGITAL INPUT
COAXIALOPTICAL
OUT
IN
IN
L
R
GND
AM LOOP
IN
IN
MONITOR
OUT
SAT / DVD / CD Player / TV
COAXIAL DIGITAL IN (AUDIO)
Connect to coaxial digital output of
DVD, CD, SAT or other compatible
devices.
OPTICAL DIGITAL IN (AUDIO)
Optical Fiber Cable
Connect to optical digital output of
DVD, CD, SAT or other compatible
devices.
DVD / CD / SAT
DIGITAL INPUT
COAXIAL OPTICAL
HINT
• For FM reception, extend antenna to its full
length.
• For AM reception, rotate the antenna
horizontally to get better reception.
RF modulator
TV
RF cable
AV cable
The diagram shown above may varies from your actual RF
modulator, please refer to your RF modulator manual.
AV in
AV out
RF in RF out
B_DPL580 EN 4/16/04 12:52 PM Page 9