Filter
Top Products
Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
Recording Standby
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display.
2. In CD stop mode, CD navigation mode or CD
pause mode, press REC MP3 PLAYER.
3. Press to start CD playback and recording
will begin. This is indicated by the REC
mp3Player icon on the display.
4. Press to stop recording.
Recording
Example
(To record only selected tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a Program List” on page 19.
2. In CD stop mode or navigation mode, press
REC MP3 PLAYER.
3. From normal playback mode, press PROG to
enter program play mode. Playback and
recording begins automatically. The Prog
icon lights and REC mp3Player icon
flashes on the display.
4. Press or REC MP3 PLAYER to stop
recording.
Instant Recording
1. In CD playback mode, press REC MP3
PLAYER to start recording. REC mp3Player
icon flashes on the display.
Recording Tuner / AUX to mp3
player
Instant Recording
1. In Tuner or AUX mode, press REC MP3
PLAYER to start recording.
Recording
Example
1. In radio mode, select the station to record
(refer to page 15 for details).
2. Press REC MP3 PLAYER to start recording.
3. Press or REC MP3 PLAYER to stop
recording.
FM
91.10MHZ
Note:
The encoding bitrate for tuner, CD
and AUX signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
Recording
Tips:
If CD playback is already started,
recording will begin instantly when REC
MP3 PLAYER is pressed.
If CD playback is stopped, playback and
recording will start instantly when REC
MP3 PLAYER is pressed.
Tips:
Recording stops automatically when
CD stops (Example: end of disc is reached).
EN
17
0:20
SONG NAME
CS196 EN 17/2/06 7:29 PM Page 24