Filter
Top Products
13
STOP Mode
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total track number
will be shown on the LCD display).
SKIP PLAY (For both CD and CDG discs)
When playing any CD disc or during stop mode, you can skip up or down to your desired track number
by pressing the SKIP buttons( SKIP ).
SEARCH (For CD Audio discs only, SEARCH mode will not operate for CD+Gs.)
When playing any Audio CD disc, you press the SEARCH buttons ( SEARCH ), the system will
search at high speed in the forward or reverse direction. By releasing the button, normal play will
continue.
REPEAT PLAY
- To repeat the track currently playing, press the REPEAT button once, the display will show REPEAT ONE,
then the track will be repeated.
- To repeat all the tracks of particular disc, press the REPEAT button twice, the display will show REPEAT
ONE DISC. Press the PLAY/PAUSE button to begin, then all the tracks will be repeated on this articular
disc.
- To repeat all the tracks of all discs which have been inserted in the CD drawer, press the REPEAT button
three times, the display will show REPEAT ALL DISC. Press the PLAY/PAUSE button to begin, then all the
tracks will be repeated on all discs.
- To clear the repeat function, press the REPEAT button again, the REPEAT icons will turn off.
PROGRAM PLAY (Back up memory not provided)
- Use this PROGRAM key to program and play back songs in a preselected order.
- Select the desired DISC by pressing the DISC 1, DISC 2 or DISC 3 button, the desired DISC number will
show on the LCD display.
Any particular DISC location, programming should be done in the STOP mode only. Press the PROGRAM
button once, the display will show the MEMORY icon and the “P - 01” icon. Then press the DISC 1, DISC
2 or DISC 3 button to select a desired disc and press the SKIP buttons ( SKIP ) to select a desired
track. Then press the PROGRAM button to confirm entry. You can repeat the same steps up to a maximum
of 32 tracks, and this programming procedure can be repeated on each of the selected DISC.
- To clear all the programmed memories, press the STOP button.
- Note: When the power is turned off all memory selections will be erased.
MEGA BASS
When playing CD disc or Cassette Tape, you can switch the MEGA BASS switch to the right
hand side, the mega bass effect will be turned on and switch MEGA BASS switch to the left
hand side, the mega bass effect will be turned off.
-