Filter
Top Products
Timer operations
RQT5355
34
Using the timers
The play timer
This timer starts play of the selected source at the selected time. The
example shows settings for preset radio channel 8 to play between
6:30 and 7:40 at j40 dB.
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations if you want the timer to start playing
the radio (➡ page 17).
1 1 Press [CLOCK/TIMER, –DEMO] to
select “FPLAY.”
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
2 Press [SET] within 3 seconds.
2–5
1 Press [TUNING (X or W)] to select
the condition required and
2 press [SET].
2 Select the start time.
3 Select the finish time.
4 Select the source.
TUNER()CD()TAPE
^----------------------------------J
Insert a CD or tape if you select these sources.
If you select TUNER
Select a preset channel.
5 Select the volume.
The play timer is now on standby. The display shows each
condition again then restores the original display.
6 Press [ê/I] to turn the unit off.
“FPLAY/FREC” indicator remains illuminated to show the
play (or record) timer is on even when ECO mode is selected
(➡ page 11).
The timer starts at the set time with the volume increasing gradually
to the set level.
To cancel the timer
Press [FPLAY/FREC] so “FPLAY” goes out.
Each time you press the button:
FPLAY>FREC>FPLAY FREC>Light off (OFF)
^---------------------------------------------------------------------------------}
The play timer function will be canceled, but the settings stay in the
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.
2
3
4
5
1
6 1 2–5
1
2
1
2
œPLAY/œREC
SET
CLOCK/TIMER
@
DEMO
SET
6
FPLAY
FPLAY
FPLAY
FPLAY
FPLAY
2–5
?
TUNING
@
FPLAY
C
H
FPLAY
MHz
FPLAY
H/I