Filter
Top Products
9
Using Function Control 1
In DAB mode, use function control to set system options. There
are 6 options in the function control.
Station order
Signal error rate
Preset tune
Software version
DRC value
Manual tune
Station order
Use station order to set the order in which stations are listed.
There are four orders: Favourite, Alphanumeric, Active and Tidy.
While listening to a DAB broadcast press the
FUNCTION/FM MODE button.
Turn the TUNING/SELECT knob until ‘Station order’ is
displayed in the second line of the display.
2
1
Press the ENTER button.
5
TUNING/SELECT ENTER
FUNCTION/FM MODE
Turn the TUNING/SELECT knob until the desired option
is displayed in the second line of the display.
4
Fav Station (Favourite station)
As you tune in stations and listen to them the unit will
memorize the top ten stations you listen to and list them
at the top of the channel list. A Favourite station in the
channel list has ‘ ’ displayed after the station name on
the first line of the display.
Alphanumeric
This is the default order. Channels are listed by name
with numbers first and then alphabetically by letters in
the channel name.
Active station
This option will list active stations at the top of the
channel list and channels that are in the list but have no
service in your area to be listed last in the channel list.
Tidy station
This option will list active stations and remove any
channels that are in the list but have no service in your
area from the channel list.
q
preset
This option takes your top ten Favourite channels and
assigns them to preset numbers 1 - 10.
This option is only available after ‘Fav Station’ option has
been turned on. See above.
Press the ENTER button.
The current option is displayed in the first line of the display.
3