Teac SR-LX5i Radio User Manual


 
ENGLISH
13
Insert the headphones plug into the
PHONES jack, and adjust the volume.
CAUTION
Always lower the volume level prior to
plugging in your headphones. TO AVOID
DAMAGING YOUR HEARING - Do not
place your headphones on your head
until after you have plugged them in.
< If you change the volume or source
during the muting, the muting will be
canceled.
Muting
To mute the sound temporarily, press the
MUTING button. Press the MUTING
button again to restore the sound.
SLEEP 90, 60 or 30:
The power will be switched to standby
90, 60 or 30 minutes later.
OFF:
The sleep timer is off.
< If you want to check the remaining time,
press the SLEEP button once. The
remaining time will be displayed for a
few seconds.
Bass control
To switch the bass boost function between
high and low, press the DBSS HI/LO button
to display the current DBSS level. Then press
the button again to switch between “DBSS
HI” (high) and “DBSS LO” (low).
Sleep Timer
You can set a sleep timer so the unit
turns itself off after a specified time.
Press the SLEEP button repeatedly until
desired time appears on the display.
Headphones