Filter
Top Products
20
MEMORY
FUNCTION
Up to 64 tracks can be programmed in the desired order.
Press the FUNCTION button to select “CD”.
1
Press the MEMORY button.
2
“MEMORY” lights up in the display.
< To cancel the program mode, press the Stop button (H).
Press the Skip button (.or/) repeatedly to select a
folder of a MP3 disc, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the “001” (ROOT)
folder.
< Skip this step when playing a CD.
3
The track is programmed, and “P-02” is displayed.
< Repeat steps and to program more tracks.
< You can program up to 64 tracks.
43
CD MP3
Programmed Playback
Press the Skip button (.or/) repeatedly to select a
track, then press the MEMORY button.
4
< When the playback of all the programmed tracks has finished,
or if you press the Stop button (
H), the MEMORY indicator
will go off and the program mode will be cancelled. Still the
program is retained in memory.
You can return to the programmed playback by pressing the
MEMORY button and the Play/Pause button (
G/J).
< Shuffle function doesn’t work during programmed playback.
MP3
CD MP3
When the selection of track numbers is completed,
press the Play/Pause button (
G/J) to start program
playback.
5
13
Muting
To mute the sound temporarily, press the MUTING button.
Press the MUTING button again to restore the sound.
< While muting is engaged, “MUTING” blinks on the display.
< If you change the volume during the muting, the muting will
be canceled.
Headphones
For private listening, first reduce the volume level to
minimum. Then insert the plug from your headphones into
the PHONES jack, and adjust the volume using the VOLUME
buttons. The sound from the speakers is cut off while the
headphone jack is inserted.
Sleep Timer
Repeatedly pressing the SLEEP button permits setting an
interval (from 90 down to 10 minutes) after which you want
the unit to automatically turn off and shift into Standby
mode.
Each press of the SLEEP button changes the time indication by
10 minutes.
90 80 10
………
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do
not place your headphones on your head until after you have
plugged them in.
Tone Control
1. Press the BASS or TREBLE button.
To adjust the level of low frequency sound range, press the
bass button.
To adjust the level of high frequency sound range, press the
treble button.
2. Within 5 seconds, press the VOLUME buttons to change
the setting.
The level can be adjusted from –4 to +4.
(off)