Filter
Top Products
16
Setting the Clock Time and Calendar
1
Press and hold the Clock ADJ Button located on the top of
the unit until 12H or 24H appeared. Select your desired clock
display either 12 hour or 24 hour by turning TUNING /
SELECT Knob (or press . or/ on the remote control).
Then press the Clock ADJ Button again to confirm 12H or
24H mode setting.
2
The hour display at the center will blink. Turn the TUNING /
SELECT Knob (or press . or/ on the remote control)
to set the current time, then press the Clock ADJ Button
again to confirm clock setting. (Note: if the system is set to
12-hour mode, the AM or PM indicator will be lighted on.)
The minute display will now blink. Follow the same
procedure to set the minute.
3
The month, date and year display at the lower will blink
successively. or turn TUNING /SELECT Knob (or press .
or/ on the remote control) until current month, date,
year is displayed. Press the Clock ADJ Button to confirm
month, date or year setting.
Clock ADJ
1
The unit can set two Alarm Times.
2
Press and hold the ALARM 1 or ALARM 2 Button until the
display blinks. Press the FUNCTION/WAKE TO Button to
select mode of HD RADIO FM, HD RADIO AM, IPOD or
BUZZER to wake to, then press ALARM 1 or ALARM 2
Button to confirm.
Alam indicator ( or ) appears on the display
3
The Hour display will blink, turn TUNING /SELECT Knob (or
press or Button on the remote control) to select, press
ALARM 1 or ALARM 2 Button to confirm.
4
The Minute display will blink, turn TUNING /SELECT Knob
(or press or Button on the remote control) to select, press
ALARM 1 or ALARM 2 Button to confirm.
5
The Volume level display will blink, turn VOLUME DOWN or
VOLUME UP Knob to select, press ALARM 1 or ALARM 2
Button to confirm.
6
The Alarm 1 or Alarm 2 icon will light up on display.
• If the source is set to "iPod", but when iPod is not setting,
the unit will turn on into buzzer mode.
• When the source is set to "TUNER"and the unit turns on, it
will tune in to the station you selected last time.
NOTE :
• Once you set the alarm time, the alarm will be automatically
armed. The Alarm icon will appear to indicate the alarm is
armed. Make sure to adjust volume level for comfortable
wake up volume.
1
2
Setting the Alarm Time