Teac GF-650 CD Player User Manual


 
14
Press the POWER switch to turn the unit on.
1
Select a source by pressing the corresponding button.
2
< To listen to an external source connected to AUX jacks, select
AUX by pressing the PHONO/AUX button once or twice.
Play the source, and adjust the volume by turning the
VOLUME knob.
3
Basic Operation
Caution:
<
Before use, completely loosen the shipping screws by turning
them clockwise with a coin and remove the stylus guard.
< When turning on the power to the unit, the tone arm may
move if the cum was subjected to shock during transportation
and has been displaced.
When you use the GF-650 for the first time, turn on the
power to the unit leaving the vinyl tie intact to prevent the
tone arm from moving and leave the unit alone for more than
30 seconds. Thereafter remove the vinyl tie.
Press the PHONO/AUX button once or twice to select
PHONO.
1
Select the size of record: 17cm or 30cm.
4
Put the record on the turntable.
When playing a 45 RPM record, use the included adaptor.
3
Gently open the dust cover.
Be careful not to pinch your finger.
2
1 3
2
Select the speed: 33 or 45.
5
Listening to a Record