Teac A-H01 Stereo Amplifier User Manual


 
16
Specifications
Amplifier Section
Maximum power output
30 W + 30 W (8 Ω, 1 kHz, JEITA)
60 W + 60 W (4 Ω, 1 kHz, JEITA)
Rated power output
22 W + 22 W (8 Ω, 1 kHz, 0.1 %)
43 W + 43 W (4 Ω, 1 kHz, 0.1 %)
Total Harmonic Distortion
0.05 % (1 kHz, 4 Ω, 40 W)
S/N Ratio
LINE IN: 100 dB (IHF-A/input short)
Frequency Response
10 Hz - 80 kHz (–3 dB)
Digital audio input
RCA terminal x 1 (input impedance 75 Ω)
0.5 Vp-p
Optical digital terminal x 1
–24.0 to –14.5 dBm peak
USB port – B connector ..............USB 2.0
Data sampling frequency
32/44.1/48/88.2/96/176.4/192 kHz
Data bit length ...................16/24 bits
General
Power supply
Europe model ............AC 230V, 50 Hz
U.S.A./Canada model .....AC 120V, 60 Hz
Power consumption ...................34 W
External dimensions (W x H x D)
215 x 61 x 258 mm
(including protrusions)
Weight ...............................1.6 kg
Operating temperature ......+5 °C to +35 °C
Operating humidity
5 % to 85 % (no condensation)
Storage temperature . . . . . . . –20 °C to +55 °C
Accessories
Power cord x 1
Remote control unit (RC-1268) x 1
Batteries (AAA) x 2
Owner’s manual (this document) x 1
Warranty card x 1
<
Design and specifications are subject to change
without notice.
<
Illustrations may differ slightly from production
models.
The nameplate is located on the bottom of the
unit as shown below.
Nameplate