Filter
Top Products
12
Installing dedicated TEAC driver software on a computer
To play back music files stored on a computer with this unit, you must download dedicated driver
software from our website and install it on the computer before making your USB connections.
<Website address for downloading the dedicated driver software>
http://www.teac.co.jp/audio/software_teac_e.html
This unit can be connected through USB and used with a computer running Windows XP (32-
bit), Windows Vista, Windows 7, Mac OS X 10.6.4 or later. Use with a computer running a different
operating system cannot be guaranteed.
Note
Install dedicated TEAC driver software before connecting to the computer through USB.
If you connect the unit to the computer before installing the driver, the unit will not function
properly. Moreover, when using Windows XP (32-bit), the computer could become remarkably
slower and require restarting in some cases.
<
For detailed information about how to install dedicated driver software, see our website.
<
Depending on the computer’s hardware and software conguration, the unit might not function even
when used with one of the operating systems listed above.
Connect the unit to the computer using HIGH SPEED asynchronous mode.
Sampling frequencies that can be transmitted are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4
kHz and 192 kHz.
If the connection has been made properly, “TEAC USB HS ASYNC AUDIO” will be selectable as an
audio output destination.
<
In asynchronous mode, jitter that occurs during transfer is suppressed because the clock signal of this
unit is used for playback of the audio data transmitted from the computer.
Playing Back Music Files Stored on a Computer (1)