Teac 9A10490600 Stereo Receiver User Manual


 
23
Specificatioins
FM Tuner
Tuning range . . . . . . . . . . 87.50 - 108.00 MHz (50 kHz steps)
Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . 65 dB (Mono)
60 dB (Stereo)
AM Tuner
Tuning range . . . . . . . . . . . . . . 522 - 1620 kHz (9 kHz steps)
Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 dB
DAB Tuner
Tunig range . . . . . . . . . . . . . . . Band 3, 174 MHz - 240 MHz
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ohms, nominal
Max signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –3 dBm typ
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –96 dBm typ
Adjacent Channel Rejection. . . . . . . . . . . . . . . . . . . 35 dB typ
Digital output . . . . . . . . . . . . . . . . . . 24 bit/48 kHz resolution
Audio output . . . . . . . . . . . . . . . . . . . . . . . . Stereo, 2.5 Vp-p
General
Power requirements . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
Power consumption . . . . . . . . . . . . . . . . 9 W (Standby: 3 W)
Dimensions (W x H x D) . . . . . . . . . . . . . . 215 x 93 x 305 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 kg
Operating temperature. . . . . . . . . . . . . . . . . . . . +5˚C - +35˚C
Operating humidity . . . . . . . . . 5% to 85% (no condensation)
Storage temperature. . . . . . . . . . . . . . . . . . . . . –20˚C - +55˚C
Accessories
AM loop antenna x 1
FM Lead-type antenna x 1
DAB antenna x 1
RCA pin cable x 1
Remote control connection cord x 1
Design and specifications are subject to change without
notice.
Weight and dimensions are approximate.
Illustrations may differ slightly from production models.
With this unit you can receive and listen to Digital Audio
Broadcast (DAB) programmes. DAB uses digital, not analogue
signals, resulting in near CD-quality audio with virtually
interference-free reception. Along with superior quality audio,
DAB can also deliver additional audio channels and text. In the
future, computer data and images are also possible.
Digital radio is broadcast as groups of data called ensembles or
multiplexes. Each multiplex can contain a number of stations
(services) and each station contains a primary service and can
contain secondary services as illustrated in the following
diagram.
Each multiplex is transmitted in a set frequency range and
received by this unit for decoding. You can receive multiplexes
broadcast in the 174-240 MHz frequency band and store the
services in each multiplex for you to access. The number of
multiplexes you receive depend on your location. Channels used
in the UK are in the range 10A to 12D.
Multiplexes and stations have labels (names) that are used to
identify them. Instead of needing to know the particular
frequency of your favourite broadcast, you can simply select the
station name. Secondary services and additional data such as
text or multiplex info are also available.
DAB SIGNAL
MULTIPLEX
PRIMARY
SERVICES
SECONDARY
SERVICES
Parliament
BBC Radio 4
BBC
National
DAB
1
1
2
3+
1
2
3
4+
About DAB