Filter
Top Products
5
OPERATIONS
Playing a disc
1. Select CD function.
2. Press to open the CD door. “OPEN”
is displayed.
3. Insert a disc with the printed side facing
up and press to close the CD door.
“CD READ” is displayed as the CD
player scans the contents of a disc, and
then the total number of tracks and
playing time are shown.
4. Press PLAY ( ) to start playback.
To interrupt playback
• Press PLAY ( ). The current track
time flashes.
• To resume playback, press PLAY ( )
again.
To stop playback
• Press STOP ( ).
Playing back from SD memory card
This system is equipped with a SD card slot
for SD memory card.
1. Insert a SD memory card to SD slot.
2. Select USB-CARD function.
3. The total numbers of folder and track
are displayed.
4. Press PLAY ( ) to start playback.
To interrupt playback
• Press PLAY ( ). The current track
time flashes.
• To resume playback, press PLAY ( )
again.
To stop playback
• Press STOP ( ).
Playing back from the USB mass
storage class device
This system is equipped with a USB port to
connect a USB mass storage class device.
1. Connect a USB mass storage class
device to USB port.
2. Select USB-CARD function.
3. The total numbers of folder and track
are displayed.
4. Press PLAY ( ) to start playback.
To interrupt playback
• Press PLAY ( ). The current track
time flashes.
• To resume playback, press PLAY ( )
again.
To stop playback
• Press STOP ( ).
NOTE:
Connect the USB mass storage class device directly to
the system. Using a USB hub may result in malfunction.
Selecting a different track
• Press or repeatedly until the
desired track number appears in the
display.
Locating a particular portion
• Press and hold down on or until
the portion you want is reached.
Selecting a desired folder/track
To select a desired album
• Press FOLDER/PRESET ( or ) on
remote control repeatedly.
To select a desired track
• Press or repeatedly until the
desired track number appear in the
display.
• If playback is stopped, press PLAY (
) to start playback.
Searching for a name of track/folder
To select the track by searching for its
name. (for MP3-CD only)
1. Press FIND/ST/MO once on the remote
control. An initial letter of a track name
and a track name are displayed.
2. Press or repeatedly to select
a initial letter of track name.