Filter
Top Products
CD Player
∑ Music search using SKIP but-
tons (Ú/Æ)
The beginning of any track can be easily
located using the Ú/Æ SKIP buttons.
This operation is indicated clearly in the
TRACK display.
O This operation is possible even in the
Program Playback mode. However, only
programmed tracks will be detected.
∑ To skip to the next track
Press the Æ button.
The player will skip ahead to the next track
each time the Æ button is pressed. The
player can be advanced to the last track
this way, but once the beginning of the last
track is reached, the player will not
advance even if the Æ button is pressed.
∑ To skip back to the previous track
Press the Ú button.
The player will skip back one track each
time the Ú button is pressed. If this but-
ton is pressed in the middle of a track, the
player will skip back to the beginning of the
current track. To make it skip back to the
previous track, the button must be pressed
twice.
In this way, the player can be returned to
the beginning of the first track on the disc.
∑ Music search using SEARCH
butto
ns (/Ò)
During playback or in the Ready mode, hold
down the Ò button of the remote control
or the Æ button of the main unit to move
the playing position quickly in the forward
direction, and hold down the button of
the remote control or the Ú button of the
main unit to move quickly in the reverse
direction.
During the manual search operation, sound
will be audible but the output level will be
lowered. This lets you search for any
required portion while checking the sound.
When the desired position is reached,
release the button to reenter the previous
mode.
∑ Even if the disc tray is open ...
When the CD PLAY (∏) button is pressed:
The disc tray will close and playback starts
from the first track.
∑ To stop playback
Press the STOP (∑) button. The player
enters the Stop mode.
To unload the disc:
Press the OPEN/CLOSE (∫) button; play-
back stops and the disc tray will slide out,
and all functions are reset to their initial
settings.
To temporarily suspend playback
(Ready mode):
Press the ƒ button. Playback stops at the
current position and the ƒ indicator lights
steadily. To resume playback from the
same position, press the ∏ or ƒ button.
CAUTION :
O Do not force the tray by hand during
opening and closing operations.
1. Press the POWER switch.
2. Press the OPEN/CLOSE (∫) button.
The disc tray will slide out. Place the
disc gently on the tray with its label side
facing upward. The disc is set within the
disc guides at the center of the tray.
3. Press the OPEN/CLOSE (∫)button again.
The disc tray will close.
Several seconds later, the following
information is displayed.
4. Press the CD PLAY (∏) button.
Disc playback starts from the first track,
and the ∏ (play) indicator will light.
O During playback, the number of the cur-
rently played track blinks on the music
calendar.
O When tracks have been played, their
numbers will disappear from the music
calendar display.
_
7
_
Basic Operation Music Search Operation