Filter
Top Products
∑ Even if the disc tray is open ...
When the å button is pressed:
The disc tray will close and playback starts
from the first track.
∑ To stop playback
Press the STOP button. The player enters
the Stop mode.
To unload the disc:
Press the OPEN/CLOSE button; playback
stops and the disc tray will slide out, and all
functions are reset to their initial settings.
To temporarily suspend playback
(Ready mode):
Press the ƒ button. Playback stops at the
current position and the ƒ indicator lights
steadily. To resume playback from the
same position, press the ∏ or ƒ button.
CAUTION :
O Do not force the tray by hand during
opening and closing operations.
_
7
_
1. Press the POWER switch.
2. Press the OPEN/CLOSE button.
The disc tray will slide out. Place the
disc gently on the tray with its label side
facing upward. The disc is set within the
disc guides at the center of the tray.
3. Press the OPEN/CLOSE button again.
The disc tray will close.
Several seconds later, the following
information is displayed.
4. Press the CD PLAY (∏) button.
Disc playback starts from the first track,
and the ∏ (play) indicator will light.
O During playback, the number of the cur-
rently played tune blinks on the music
calendar.
O When tunes have been played, their
numbers will disappear from the Music
Calendar display.
CD Player
Basic Operation
For 8 cm (3-inch)
CD singles
For 12 cm (5-inch)
Compact Discs
Tune numbers on disc up to 20
Total number of
tunes on the disc
Total playback
time of disc
∑ Music search using SKIP but-
tons (Ú/Æ)
The beginning of any tune can be easily
located using the Ú/Æ SKIP buttons.
This operation is indicated clearly in the
TRACK display.
O This operation is possible even in the
Program Playback mode. However, only
programmed tunes will be detected.
∑ To skip to the next tune
Press the Æ button.
The player will skip ahead to the next tune
each time the Æ button is pressed. The
player can be advanced to the last tune this
way, but once the beginning of the last tune
is reached, the player will not advance
even if the Æ button is pressed.
∑ To skip back to the previous tune
Press the Ú button.
The player will skip back one tune each
time the Ú button is pressed. If this but-
ton is pressed in the middle of a tune, the
player will skip back to the beginning of the
current tune. To make it skip back to the
previous tune, the button must be pressed
twice.
In this way, the player can be returned to
the beginning of the first tune on the disc.
∑ Music search using SEARCH
buttons (/Ò)
During playback or in the Ready mode, hold
down the Ò button of the remote control
or the Æ button of the main unit to move
the playing position quickly in the forward
direction, and hold down the button of
the remote control or the Ú button of the
main unit to move quickly in the reverse
direction.
During the manual search operation, sound
will be audible but the output level will be
lowered. This lets you search for any
required portion while checking the sound.
When the desired position is reached,
release the button to reenter the previous
mode.
Music Search Operation
or