Filter
Top Products
_
5
_
O Before connection, turn off all compo-
nents and pay special attention to left (L)
and right (R) channel indications.
O Read the owner's manual of each com-
ponent you intend to use with this unit.
∑ Signal cords
LINE IN / OUT terminals
Connect the LINE IN terminals to the TAPE
REC terminals and connect the LINE OUT
terminals to the TAPE PLAY terminals of the
stereo amplifier using RCA pin plug cords.
O LINE OUT terminals output the compact
disc or cassette deck tape signal. When
both compact disc and tape are played
back, the tape sound has priority.
CD LINE OUT terminals
Connect the CD LINE OUT terminals to the
CD, DAT or AUX terminals of the stereo
amplifier using RCA pin plug cords.
O CD LINE OUT terminals always output
the disc signal.
∑ Power cord
Be sure to connect the power cord to an AC
outlet which supplies the correct voltage.
Connections
Be sure to remove the power cord from the
AC outlet before repositioning the voltage
converter switch.
1. Locate the voltage selector on the rear
panel.
2. Using a flat-bladed screwdriver, set to
the appropriate 230 V or 120 V position
according to your area.
Voltage Conversion
(For general export models)
Stereo Amplifier
CD-A500
Rack mounting
Install this deck with the provided
mounting screw kit as illustrated.
Caution:
If the CD player interferes with the tuner, TV
reciever, etc., allow a reasonable distance
between them.
∑ Headphones
When using headphones, connect the
headphone plug into the PHONES jack.
O Adjust the level of the signals output
from the phones jack.