Filter
Top Products
08_ DEFINITION DC10A OWNER’S MANUAL
TECHNICAL SPECIFICATIONS
DC10A
PERFORMANCE
Recommended amplier power 30 – 300
(Watts RMS)
Continuous power handling 150
(Watts RMS)
Peak power handling (Watts) 600
Sensitivity (2.83 Volts @ 1m) 93 dB
Nominal Impedance (ohms) 8
Frequency response (-6 dB) 28 Hz – 22 kHz
Dispersion (degrees conical) 90
DRIVE UNITS
Dual Concentric™ high frequency 51 mm (2”) Aluminium alloy dome,
Alnico magnet system with Pepperpot Waveguide
TM
Dual Concentric™ low frequency 250 mm (10”) treated paper pulp cone with twin roll impregnated
fabric surround. 52 mm (2”) edge wound voice coil, Alnico magnet system
CROSSOVER
Crossover frequency 1.1 kHz
Crossover Type Bi-wired, hard wired passive low loss 2nd order LF,
2nd order compensated HF, Cryogenically treated
CABINET
Enclosure type Twin Rear ported
Dimensions H x W x D 1135 x 345 x 438 mm
Inc plinth & grille (44.69 x 13.58 x 17.24”)
Volume 103 Litres (3.64 cu. ft.)
Weight 42.7 kg (94.1 lbs)