Filter
Top Products
User's Manual
15
CHAPTER 2
System Con¿ gurations
The following pages show some typical con nec tions that you might make in your
in stal la tion. They show how the inputs and outputs of the TGR-401 are con nected to
various audio and video com po nents.
When this input is selected from the
front panel or the remote control, the
VCR’s audio will play in your system
and the video is sent to the TV.
As with all the video connections
that follow, you must make sure that
your TV monitor is set to look at its
correct video input or you will not see
the picture.
If your TV and other video com po -
nents have S-Video connections, use
them, as they provide better picture
quality than composite video.
Analog audio signals
From: VCR audio outputs
To: TGR-401 IN1 L/R audio inputs
Composite video signal
From: VCR video output
To: TGR-401 IN1 video input
Composite video signal from
TGR-401 MON composite video output
to TV Monitor's composite video input
Analog Audio and Composite Video (VCR)
VCR Player