Sunfire IV Home Theater System User Manual


 
User's Manual
6
CHAPTER 1
Your Theater Grand IV should
reach you in perfect con di tion. If
you do notice any shipping damage,
please contact your Sunfi re Dealer
immediately.
Gently lift out the unit and remove
all the packing material and ac ces -
so ries. It is im por tant to save all the
packing ma te ri als and the box in case
your Theater Grand IV ever needs to
be moved or shipped for repair.
Make sure that you keep your sales
receipt. It is the only way to establish
the duration of your Limited Warranty
and it may come in useful for insur-
ance pur pos es.
Please take a moment to fi ll out and
mail the Sunfi re Customer Response
card. Also read the serial num ber
located on the rear panel, and record
it here:
Serial #:
___________________________
Purchased at:
___________________________
___________________________
___________________________
___________________________
Date: _______________________
Unpacking Features
Fully automatic signal-sens-
ing for audio and video input
se lec tion
• Automatic video format
transcoder upconverts video
sources to S and component
video
• Dolby
Digital EX, Dolby Pro
Logic IIx, DTS ES and DTS
Neo:6 decoding modes
• DSP Holographic Imaging
for unbelievable soundstage
enhancement
• 7.1 channel outputs plus ste-
reo side outputs for a total of
9.1 channels
• Three component video inputs
and two component video out-
puts
• Party mode allows two channel
playback through all speakers
• AM/FM tuner with 40 presets
• Flash memory upgradable
through RS232 or CD
• Second zone can play sources
independent of the main zone
• Six A/V inputs, each with audio,
S-video and composite video
• Three A/V outputs, each with au-
dio, S-video and composite video
• Three audio-only inputs, in-
clud ing MM Phono
• 8 channel analog input with sepa-
rate RCA connectors
• On screen display (OSD)
• Two Tape record outputs
• Six coaxial and four optical digital
inputs
• Coaxial and optical digital out-
puts (including from analog and
downmixed 5.1 sources)
• IEEE 1394 (FireWire™) port for
future expansion
• Treble and Bass tone controls
• RS-232 port with discrete codes
• Trigger outputs for both zones
• IR control of both zones, with
rear IR ports and discrete codes.
• Supports all digital sampling
rates to 96 kHz
• 24-bit Crystal Semiconductor
®
Analog to Digital converter
• 24-bit, 192 kHz Analog Devices
®
Digital to Analog converters
• 32-bit, 20 MHz control micro-
processor and 24-bit, 150 MIPS
Motorola Symphony
TM
DSP pro-
ces sor
• DSP “simulated” sur round mode
for two channel sources
• Gold plated inputs and outputs
• Can record a downmixed 2
channel output from a 5.1 digital
source
• Direct 2-channel analog bypass
mode
• Balanced XLR outputs and un-
balanced RCA outputs
• Four subwoofer outputs
• IEC removable power cord
• Steel chassis with thick, milled
aluminum faceplate
Remote Features
• Fully backlit
• Pre-programmed for most brands
of A/V equipment
• Learns commands from your
other remote controls
• Macro feature lets you program a
sequence of control steps
• Operates up to ten components
• Does not lose programming
memory when chang ing batteries