Filter
Top Products
35
35. AUDIO OUT-SOCKETS This analogue signal
requires RCA (left & right) connections. Connect this
output to the respective input of your mixer (Line/Aux).
36. DIGITAL OUT-SOCKET This digital signal
requires one SP/DIF (75 Ohm) connection. Connect
this output to the respective input of your mixer /
computer.
37. RELAY SOCKET Via the RELAY SOCKET, two
CD players can be linked (connected) for relay play. If
you connect to a mixer which supports fader start,
you can also relay play via mixer’s cross-fader.
38. POWER SWITCH Press this button to activate
the unit (i.e. Power ON/OFF)
39. AC CONNECTION Plug in the power supply
cable here.
LCD Display
14
1. TRACK Shows the current track selected /
playing.
2. SINGLE Shows when the unit is set to play just
one track at a time. When this is not lit the CD will
play continuously through all tracks. The function is
controlled by the SGL/CTN button.
3. LOOP Shows when the CD is in LOOP mode;
repeating a particular area of music on the CD.
4. RELOOP Shows when the CD has had a loop set
previously and that the loop is ready to be played
again.
5. ELAPSED, TOTAL REMAIN Indicates the time
shown on the display is either ELAPSED, TOTAL
REMAINING or the single song remaining time.
6. MINUTE, SECOND, FRAME Displays the time of
Track(s) currently selected in increments of Minutes,
Seconds, and Frames.
7. TIME BAR shows either time remaining or
elapsed depending on the setting of the TIME button.
8. PITCH indicator light to show percent of pitch is
displayed.
9. BPM indicator lights up when BPM button is
engaged.
10. PITCH/BPM Shows either the percentage change
in pitch or the BPM of the song depending on the
mode selected with the BPM button.
11. ANTI SHOCK AND BUFFER INDICATOR
Indicates the current status of the Buffer Memory.
This is represented on the display by a bucket being
filled or emptied. The bucket itself represents the
instant start function (which works by buffer memory).
If the bucket is flashing, the instant start is not
available. Each bar within the bucket represents 2
seconds of anti shock protection. There is up to 10
seconds of anti shock available.
12. CUE Indicates the unit is at a cue point and is
ready to play.
13. PAUSE Indicates the unit is in CUE/ PAUSE
mode.
14. PLAY Indicates the unit is currently playing a CD.
15. WHEEL INDICATOR A visual representation of a
vinyl marker, indicating play position in frames. This
wheel rotates during playback and stops during
pause and also indicates direction (fwd/rev).
AUDIO OUT
DIGITAL
OUT
AC IN~
POWER
ON OFF
RELAY
36 37 38 39
35
1
2
3
4
5
7
8
9
10
11
1213
15
6
14