Filter
Top Products
NAMES AND FUNCTIONS
Control Unit
(1)OPEN/CLOSE
Press it to open and close the disc holder. The main
unit also includes OPEN/CLOSE buttons. The disc
holder cannot be opened during playback, so stop
playback before pressing the button.
(2) SGL/CTN (Single/Continuous Button)
Press it to switch between the single and continuous
play modes. The SINGLE mode is indicated by the
SINGLE indicator on the LCD
(3)TIME CD MODE
Press this button to switch the time display among
the elapsed time and remaining time and total
remaining time of the disc.
(4)TRACK BACKWARD
Use this button to go back to the beginning of the
current track or select a previous track for playing.
(5)+10/FOLDER
CD mode use this button to skip ahead 10 tracks.
Mp3 mode press this button to select the next folder.
(6) TRACK FORWARD
Use this button to skip to the next CD track.
(7).(8)F.FORWARD/F.BACKWARD
Press these buttons to perform scan function during
pause mode or during play mode.
(9) PITCH SLIDER
Use the slider to adjust the CD pitch . Slide up to
decrease pitch, down to increase pitch.
(10) LCD
(11) LOOP IN
Used for setting a start loop point and releasing the
loop action.
(12) LOOP OUT
Used for setting the end loop point and releasing the
loop action.
(13) RELOOP
Depending on mode, as explained further, this button
is used for either repeating a previously set loop or
seamlessly stuttering on the last set cue point.
(14)JOG WHEEL
(15)CUE (Cue Button)
Press the CUE button during playback to return to
the position at which playback started.
(16)PLAY/PAUSE
Use this button to start playback. Press once to start
playback , once again to set the pause mode , and
once more to resume playback.
(17)PITCH RANGE
Choose from pitch percentages of 4%,8% and 16%.
(18)PITCH LOCK
Use this button to enable or disable BPM adjustment
with the pitch sliders. BPM adjustment with the pitch
sliders is enabled when the PITCH LED lights.
(19)PITCH DOWN
The CD slows down while this button is pressed.
Release the button to return to the original BPM.
(20)PITCH UP
The CD speeds up while this button is
pressed. Release the button to return to the
original BPM.
(21)RELAY
Press this button when Disc 1 ends the CD player
will automatically change to Disc 2 and when Disc
2 ends it will return to Disc 1,etc.
(22)RELAY LED
(23)PITCH 4%LED
(24)PITCH 8% LED
(25)PITCH 16% LED
(26)PITCH LOCK LED
(27)FADER START
Via the Control socket, the respective CD-player
can be remotely controlled. If you are using a mixer
with fader start-function connect the player with
the Control Out- socket. Please note that these
sockets must never be connected with any voltage.
(28)CONTROL CONNECTOR
Connect this connector to the REMOTE connector
on the main unit using the included control cord.
6
When the dial is turned during CD pause, the
point at which the sound is being produced moves
by a number of frames corresponding to the number
of clicks.
Clockwise moves the point forward, counterclockwise
moves the point backward.
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet,be sure to remove by holding the
plug attachment and not by pulling the cord.
2. In order to prevent electric shock, do not open the
top cover. If a problem occurs, contact your dealer.
3. Do not place metal objects or spill liquid inside the
CD player. Electric shock or malfunction may result.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
IMPORTANT TO SAFETY
NOTE:
This CD player uses the semiconductor laser. To allow
you to enjoy music at a stable operation, it is recommended
to use this in a room of 5ºC 41ºF - 35ºC 95ºF.
CAUTION:
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. ___________ Serial No. ___________
CAUTION: TO REDUCE THE
RISK OF ELECTRICf SHOCK,
DO NOT REMOVE THE COVER
(OR BACK) . THERE ARE NO
SERVICEABLE PARTS INSIDE.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
insulated "dangerous voltage" within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
FOR U.S.A. & CANADA MODEL ONLY
CAUTION
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
DOUBLE INSULATED - WHEN SERVICING, USE
ONLY IDENTICAL REPLACEMENT PARTS.
NOTE:
This unit may cause interference to radio and television
reception.
Line Voltage Selection (for multiple voltage
model only)
The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel, using a screwdriver.
Do not twist the VOLTAGE SELECTOR
switch with excessive force as this may
cause damage
If the VOLTAGE SELECTOR switch does not move
smoothly, please contact a qualified serviceman.
1
RATING LABEL
CLASS 1 LABEL
115V
230V