Filter
Top Products
13
Specifications
Frequency Response: 20 Hz – 20 kHz (L, C, R, Rs, Cs, Ls);
20 Hz to 80 Hz (LFE)
Inputs (Digital only): 1 balanced XLR (Lt/Rt); input level per AES3 standards
Input Impedance: 110 Ω
Outputs: 4 balanced XLRs (L/R, C/LFE, Ls/Rs, Cs); output levels
per AES3 standards
Output Impedance: 110
Ω
Sample Rates: 44.1 kHz or 48 kHz (locked to input sync source sample
frequency)
Decoding Latency: <8.2 ms
Processing: SRS – Circle Surround II Decoding algorithm with multi-
band steering on ADI DSP
Front Panel Indicators/Controls:
Input signal presence @ -44 dBFS (1 LED per
channel); Clip indicator @ 0 dBFS
Sync Source Selector – AES Pair 1/AES11 Clock &
status LEDs
Sample Rate Indicator – 44.1kHz/48kHZ status LEDs
Center Mode Selector – Discrete/Phantom & status LEDs
Monitor mode selector – Lt/Rt (CS Cinema, CS
Discrete Compare and LCRS switching using Lt/Rt
selector below), Stereo (Stereo and CS Music), Mono
(Mono and CS Mono) and Test (Pink noise cycled
through channels @ -10 dBV) & status LEDs
Lt/Rt Mode Selector – LCRS / Circle Surround Cinema
/ Circle Surround Discrete Compare & status LEDs
Output signal presence @ -44 dBFS (1 LED per
channel); Clip indicator @ 0 dBFS
Power Requirements: Auto-switching 100-240VAC, 47-63 Hz
Power Consumption: 8 W
Dimensions: Rack mount; 1 ru (1.75” x 19” x 12”)
Weight: 5 lbs. 7 oz.
Recommended Cable: Double Shielded (Foil/Braid) AES/EBU cable. Nominal
impedance 110 Ω (Ex. Belden 1696A)
Note: 0 dBu = 0.775 Vrms
(Specifications subject to change without notice)