Filter
Top Products
Monitors the incoming matrix encoded mix as stereo.
Use this setting to confirm backwards compatibility
with stereo playback devices.
CS Music – Stereo LED Blinking:
While in Stereo mode,
press and hold the Decode Mode button until the LED goes out and
release. To return to any other mode press and release to cycle
through to the appropriate mode.
Monitors the mix with Circle Surround Music decoding.
This is ideal for monitoring or extracting music content.
Mono – Mono LED Solid:
Press the Monitor Mode button
until it cycles to Mono.
Monitors the incoming matrix encoded mix as mono.
Use this setting to confirm backwards compatibility
with mono playback devices.
CS Mono – Mono LED Blinking:
While in Mono mode,
press and hold the Decode Mode button until the LED goes out and
release. To return to any other mode press and release to cycle
through to the appropriate mode.
Monitors the mono mix with Circle Surround Mono
decoding. This is ideal for extracting mono music or film
content.
Test – In order to enter the test mode, press and hold
the “Decode Mode” button for one second, then release.
This mode will generate a pink noise test signal that
cycles between all channels. Once the sequencer has
started, it can be paused on a selected channel and
restarted by pressing and quickly releasing the “Decode
Mode” button. In order to exit the test mode, press and
hold the “Decode Mode” button for one second, then
release. By functioning in this way, accidental entry into
the test mode is minimized.
6. Lt/Rt Mode Selector: Determines the surround output mode (See Page 11
for Button Function diagram).
• CS Cinema – Lt/Rt LED Solid:
Press the Lt/Rt Mode
button until it cycles to Circle Surround.
Allows the mixer to monitor TV or film content in
6.1 surround.
• CS Discrete Compare Function – Circle
Surround LED Blinking:
While in CS Cinema, Music
or Mono mode, press and hold the Lt/Rt Mode button for one
second and release. To exit CS Discrete Compare, press
and hold the Lt/Rt Mode button for one second, then release.
Allows the mixer to monitor CS content in 5.1 or
6.1 surround with adjusted calibration (L and R -2
dB and surrounds -6 dB). This emulates the
9