Filter
Top Products
16
STEREO
Specifications
S
TEREO
V
ITALIZER
Rear Panel
Version 1
(Model 9319, unbalanced jack-version, until autumn 1995)
- unbalanced input & output stages (0 dB)
- mono-1/4inch-jacks
- 2-wire power cord
- relais-hard-bypass
Version 2
(Model 9320, unbal. jacks & bal. XLR-Version)
- balanced (+6 dB) & unbalanced (0 dB) input & output stages
- NC3 XLR-connectors and mono-1/4inch-jacks
- voltage selector: 220-240 V/50 Hz or 100-120 V/60 Hz
- detachable 3-wire, U-ground power cord
- GND-Lift switch
- relais-hard-bypass
Specifications
Frequency bandwidth 10 Hz - 100 kHz (100 kHz = -3dB)
Equalizer frequency range 15 Hz - 22 kHz
CMRR (common mode rejection) -85dBu at 100 Hz
-76dBu at 1 kHz
-65dBu at 15 kHz
THD & N
(total harmonic distortion & noise) 0,002% at 1 kHz
0,105% at 10kHz
Signal to noise - CCIR 468
Bypass:
--
96dBu
In/Effekt min: -78dBu
Input & output stages
XLR: instrumentation amplifier, electronically balanced
(differential) transformerless
nominal input level +6 dB
Jack: unbalanced
nominal input level 0 dB
Input impedan ce (XLR, jack) = 20 kOhm
Output impedance (XLR) = 75 Ohm
Output impedance (jack) < 600 Ohm
Input level selector LOW (0dB) / HIGH (+8dB)
Peak indicators illuminate 3dB before clipping
Size Standard EIA 19"/1U unit,
482 x 44 x 237mm
Weight Model 9319: 2,7kg
Model 9320: 3,0kg
VVeerrssiioonn 11
Model 9319
VVeerrssiioonn 22
Model 9320