Filter
Top Products
4
TUBE VITALIZER
Operation safety
Dear Customer,
Thank you for the confidence you have shown towards SPL
electronics GmbH by purchasing the SPL Tube Vitalizer. You have
decided to use a tool of high performance which sets you in the
position to have faster success and a better sound quality in your
music productions and pre-masterings.
As a typical SPL unit the Tube Vitalizer combines exemplary
specifications and high manufacturing standard with excellent
sound quality to provide you a precious component for studio
and mastering purposes. Please read this manual carefully to
ensure you have all the information you need to use it.
We wish you every success with the Tube Vitalizer.
Your Sound Performance Laboratory-Team
I would like to start with my thanks to all our staff, who created
what is to be described here.The importance of their exceptional
qualification and talents cannot be overestimated. But the
biggest thanks I owe their unbelievable engagement, creativity
and productivity in realizing our projects.
Our products are often tested and compared in many publica-
tions and by our customers themselfs and constantly valued with
best results. I would like to pass on this broad appreciation to
those,who deserve it – my excellent colleagues.
Hermann Gier
Foreword
Thanks
The housing of the Tube Vitalizer has the standard 19" EIA
format and occupies 2U (88 mm) in your rack.
The Tube Vitalizer should not be installed near units which
produce strong magnetic fields or extreme heat. Do not install
the Tube Vitalizer directly above or below power amplifiers or
digital processors. If possible, the Tube Vitalizer should be placed
in an “analog rack”. This eliminates problems which could result
from interfering high-frequency signals such as clock frequen-
cies,MIDI or SMPTE signals.
Check that the voltage details quoted on the back panel are the
same as your local mains electricity supply. Use a minus (-)
screwdriver to set the voltage selector to the voltage for the area
in which the unit will be used.Never cover up the ventilation slots
on the top of the unit. If, during operation, the sound is inter-
rupted or indicators no longer illuminate, or if abnormal odor or
smoke is detected, or if liquids are spilled on the unit, immedia-
tely disconnect the power cord plug and contact your dealer.
Only clean your Tube Vitalizer with a soft,lint-free cloth.