Sound Performance Lab 2048 Stereo Equalizer User Manual


 
7
Connections
General Advice
Connections
Sockets
Again, while Stereo Q’s housing is EMV-proof and protects against HF-inter-
ference,placement of the unit is very important.Please read hookup instruc-
tions first (page 4).
Before connecting the the unit or any other equipment turn off all power.
Adjust the voltage setting on the back so that it corresponds with the power
conditions.
The diagrams show the correct
polarity for balanced XLR or Jack
connectors,if unbalanced wiring
is needed.
Alternatively unbalanced sig-
nals can be connected with
mono Jack connectors to the
balanced Jack sockets.
Generally all stereo signal equipment can be connected to the Stereo Q.
The diagrams on page 6 show various examples and their method of connec-
tion, whether by XLR or Jack connectors. It is of course possible to process
mono signals either singly or in pairs (if identical processing is required ...).
In order to keep the purest signal quality, input and output level controls
were intetionally ignored.The Stereo Q processes all signals in a ratio 1:1 with
a working level of 0 dBu – in other words the signals are processed exactly as
they come in.
Tip = +
Ring = -
Sleeve = GND
Tip = +
Ring = GND
Sleeve = GND
Balanced
Unbalanced
Pin wirings for balanced and
unbalanced operation (XLR
and Jack)