Connecting to Other Devices
7
Connecting to a Display Using S-Video
S-Video provides better image quality than composite
video, but lower image quality than component video. It
is available on most displays.
Note: The pins used in S-Video connectors are fragile.
Use care when handling S-Video cables to avoid
bending or breaking pins.
To connect to a display using S-Video:
1. Using an S-Video cable, connect the S-VIDEO output
on the player to the S-Video input on the display.
2. (OPTIONAL) To connect the audio output to the
display as well, use the red (right) and white (left)
connectors on the included audio/video cable to
connect the AUDIO jacks on the rear of the player to
the display’s audio input.
3. Select S-Video as the Video Output setting under
the Video setup menu on the player (see
“Configuring the Player” on page 23).
4. Select the appropriate TV Shape and TV System
settings under the Video setup menu.
Connecting to a Display Using Component Video
The progressive scan component video output on your
DVD player provides the highest quality video
available.
Note: To be able to use a component video
connection, your display must also support
progressive scan video.
To connect to a display using component video:
1. Use three RCA cables to connect the Y, Pb/Cb, and
Pr/Cr jacks on the rear of the player to the
corresponding component video inputs on the
display.
2. (OPTIONAL) To connect the audio output to the
display as well, use the red (right) and white (left)
connectors on the included audio/video cable to
connect the AUDIO jacks on the rear of the player
to the display’s audio input.
3. Select YPbPr as the Video Output setting under
the Video setup menu on the player (see
“Configuring the Player” on page 23).
4. Select the appropriate TV Shape and TV System
settings under the Video setup menu.
SL CEN FL Y Pb/Cb Pr/Cr S-VIDEO OPTICAL OUTPUT
5.1CH
AUDIO COMPONENT
R
AUDIO
(OPTIONAL)
VIDEO
L
SL CEN FL Y Pb/Cb Pr/Cr S-VIDEO OPTICAL OUTPUT
5.1CH
AUDIO COMPONENT
Y
Pr
Pb
R
AUDIO
(OPTIONAL)
VIDEO
L
OMPHT300X-1.book Page 7 Thursday, August 10, 2006 8:19 PM