Filter
Top Products
12
Initiating a call from your Headset
Depending on your mobile phone, you
may be able to initiate phone calls from
your Headset (your phone will need to
support voice dialling).
To activate, briefly press the Multi-function
Dial [1] on the Headset. If supported, you will
then be able to speak the name of the person you
wish to call, resulting in the call being initiated.
Low Battery Warning
The Headset will produce a warning tone
when the battery has only 10% charge re-
maining.
To visually indicate this, the Headset In-
dicator Light will flash red rather than
green.
Resetting your Headset
Should your Headset stop responding the battery
may require charging. If this fails to reactivate your
Headset, try the following steps:
1. Place your Headset inside the charger.
2. Briefly disconnect the power suppl y from the
charger (the power connector to the docking station
must be completel y removed).
3. Reconnect the power suppl y to the charger.
4. Remove your Headset from the charger.
Your Headset should now function again as nor-
mal.
Please Note:
Volume and pairing settings may be lost during a
reset process.
Resetting your Headset
RED