Filter
Top Products
Cal/outs for the
An&a
Tbp
Panel
Callouts
for the
An&a
Front Panel
SOUNDSTREW
LP
X-OVER
/
1
1.
2.
3.
4.
Power LED
-
Indicates amplifier power.
Subsonic
/
Hawkins Bass Control Switch
-
Select “Subsonic” to
engage the Subsonic filter at
13Hz.
Select ‘Hawkins
E&s
Confrol”to
engage the
+6dB
boost
@I
45Hz for the
lowpass
channel.
Input Selection Switch
-
Select “SPKR IN
/
RCA OUT” to engage the
high level speaker inputs and the RCA’s become outputs to run to an-
other amplifier. Select “RCA IN” to engage the RCA’s as inputs.
Low Pass XOVER Switch
-
A selectable crossover frequency switch
at 60, 80 or 1
OOHz.
8
5.
6.
7.
8.
9.
10.
11.
12.
13.
+12V
-
Connected to a fuse or circuit breaker, then to the battery’s
positive terminal.
Remote In
-
Remote turn-on input from the head unit. Accepts
+12V.
Speaker Connection Terminal
-
Speaker connections to the mono
sub channel.
High Level Speaker Inputs
-
Left and right inputs from a speaker level
source.
Inputs
-
Right and left RCA inputs for the mono sub channel.
Input Level
-The
mono channel input level control.
Fuse
-
Main power supply fuse. Warning: Replace only
with
the
same
value fuse!
GND
-
Main ground connection. Bolt to a clean chassis point in the
vehicle.
Remote Out
-
Remote turn-on output to control a second amplifier.
9