Filter
Top Products
21
XL-MP2H
Radio
Listening to the radio
Tuning
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER ( or )
button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural
and the sound becomes clearer.
Note:
This product can receive FM stereo/ FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button to select the desired fre-
quency band (FM or AM).
3 Press the TUNING/FOLDER ( or ) button to tune into
the desired station.
Manual tuning:
Press the TUNING/FOLDER ( or ) button as many times as
required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER ( or ) button is pressed for
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
FM stereo receiving indicator
FM stereo mode indicator
ST
MH
z