Filter
Top Products
132
Note: For addional information about the VGP-XL1B Changer/Recorder, see the User Guide that was
included with your packaging materials.
Loading Media Changer Unloading Media Changer
1 Make sure the Changer/Recorder is
properly connected to the Personal
Computer and is turned on.
Note: When loading discs, make
sure that the label is facing to the
right of the slot.
2 To load a single disc, press the
Load button once and insert the
disc. To load multiple discs, press
the Load button twice and insert
each disc in the slot one at a time.
The changer keeps rotating open
slots until all are filled or no until no
disc is inserted after 15 seconds.
3 Once the discs have been inserted,
they must be scanned by Media
Center before they can be viewed.
Go to More Programs and select
Manage Discs or to My DVDs
4 Click Yes on the NEW DISCS
FOUND message to update your
library with the new disc information.
To eject discs using Media Center:
1 From Media Center, go to My
Changer and select Manage Discs.
2 Select the Eject button associated
with the disc you want to eject.
To eject discs manually:
1 Press the Eject button one time to
eject the last inserted disc.
or
2 Press the Eject button two times to
eject all discs in the changer slots. If
the disc is not removed from the slot,
the eject process will time out and
stop after approximately 10 seconds.
Note: This will not eject the disc in
the changer optical drive. You must
go to Media Center to eject the last
disc. See steps 1 through 2 of To
eject discs using Media Center.