Filter
Top Products
5
Connection to the DHC-MD373
1 (DHC-MD373 only)
Firmly connect the AU BUS connecting
cable to the system cable adapter.
B
A
TC-TX373
Adapter
2 (DHC-MD373 only)
Peel away the seal paper from the back
of the system cable adapter and secure
the adapter to the DHC-MD373.
B
A
3 (DHC-MD373 only)
Firmly connect the system cable adapter
to the tape control jack on the
DHC-MD373.
B
A
Position the adapter
so that it does not
cover the ventilation
slits.
Insert the connector
firmly all the way.
continued
TC-TX373
DHC-MD373
DHC-MD373
TC-TX373
Note
The system cable adapter is used to connect the AU
BUS connecting cable for exchanging signals
between the tape deck and the DHC-MD373. If you
do not connect the system cable adapter and the AU
BUS connecting cable firmly, the tape deck and
DHC-MD373 may not operate correctly.
Position the adapter
so that it does not
interfere with the
audio connecting
cords.