Filter
Top Products
11
The remote supplied with the
DHC-MD333
1
TAPEx
1 Press `/1 (power) on the
DHC-MD373/333 to turn on the
DHC-MD373/333 component system.
The tape deck turns on automatically.
2 Insert a blank tape.
With the side you want
to record on facing up
5 Press CD SYNC on the tape deck.
The tape deck stands by for recording and
the CD player stands by for playback. The
indicators on the CD SYNC, zREC, H
(for the top side) and S buttons light up.
If you want to record starting from the
bottom side, press h (for the bottom side)
so the indicator on the h button lights up.
6 Press S on the tape deck.
Recording starts.
If the tape reaches the end of the top side
part-way through a track, the tape rewinds
and the track is recorded again from its start.
After that, recording starts with that track
from the beginning of the bottom side during
both sides recording, or recording stops
during one side recording.
To stop recording
Press x on the tape deck, x on the DHC-MD373
remote or TAPEx on the DHC-MD333 remote.
Tips
• When you press `/1 (power) on the tape deck, only
the tape deck turns on. Press `/1 (power) on the
DHC-MD373/333 to turn on the DHC-MD373/333
component system.
• Inserting the tape when the power is off
automatically turns on the tape deck only. Press
`/1 (power) on the DHC-MD373/333 to turn on
the DHC-MD373/333 component system before
recording.
• The cassette indicator lights up in red when a
cassette is inserted and goes off when no cassette is
inserted.
• When you want to reduce the hiss noise in low-level
high-frequency signals, set DOLBY NR to ON
before step 5.
• If the tape reaches the end of the top side during
both sides recording, the fadeout feature prevents
the track from ending abruptly at the end of the tape
(Fade Synchro) (DHC-MD333 only). The track
is recorded again from the beginning of the bottom
side.
Notes
• You cannot listen to other sources while recording.
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
3 Place a CD on the disc tray of the
DHC-MD373/333.
4 Set DIRECTION to g to record on
one side. Set it to s to record on
both sides.
If you select both sides recording and the
tape reaches the end of the top side part-way
through a track, the entire track is recorded
again from the beginning of the bottom side.