Filter
Top Products
15
GB
Additional Information
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both channels driven,
from 20 - 20,000 Hz; rated 200 watts per
channel minimum RMS power, with no
more than 0.05% total harmonic
distortion from 250 milliwatts to rated
output (USA model only).
Amplifier section
Power Output
200 W + 200 W (8 Ω)
400 W + 400 W (4 Ω)
Speaker Nominal Impedance:
4 Ω ∼ 16 Ω
Harmonic distortion
less than 0.005% (at 8 Ω, 10 W, THD)
Dumping factor
150 (at 8 Ω, 1 kHz)
Frequency response
5 Hz ~ 300 kHz + 0/– 1 dB (at 8 Ω, 1 W)
Input sensitivity and Impedance
1.5 V, 20 kΩ (Unbalanced)
1.5 V, 40 kΩ (Balanced)
Gain 28 dB
S/N more than 115 dB (Input shorted, A-Fil)
General
System Pure-complementary High Power Legato
Linear SEPP MOS FET power amplifier
Power requirements
USA and Canadian models
120 V AC, 60 Hz
European models
230 V AC, 50/60 Hz
Power consumption
USA and Canadian models
8.0 A
European models
600 W
Dimensions 480 × 245 × 530 mm
(18
7
/8 × 9
5
/8 × 20
7
/8 in.)
including projecting parts and controls
Mass (Approx.)
70 kg (154 lbs. 4 oz.)
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.