Filter
Top Products
7
GB
Hooking Up the Components
Required cords
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Balanced cords (not supplied)
When connecting a balanced cord, be sure to insert the plugs
firmly in the jacks. If the plugs are not connected firmly, noise
may be produced.
Audio Component Hookups
White (L) White (L)
Red (R) Red (R)
Connect the analog line outputs of your audio
components (SACD player, CD player, MD deck, DAT
deck, tape deck, etc.) to the analog line jacks on this unit.
If you have a component with balanced output capability,
that component can be connected to the BALANCED
LINE jacks on this unit.
Note
When making connections to a CD player (etc.) that has both
balanced and unbalanced output capability, make connections to
either the CD input jacks or to the BALANCED LINE jacks, but
not both. Making connections to both inputs may lessen the
quality of the audio output, or audio may not be output at all.
To the source component To the preamplifier
(L) (L)
(R) (R)
OUTPUT
L
R
INPUT
IN
ç
OUT
ç
OUTPUT
L
R
OUTPUT
L
R
OUTPUT
L
R
INPUT
IN
ç
OUT
ç
R
BALANCED OUT
L
L
R
L
R
2
R
1
SACDCDLINE BALANCED LINE
OUT I N
TAPE2/MD
DIRECT
PRE OUT
L
OUT I N
TAPE1/DAT
R
BALANCED OUT
L
1
3
1 :GROUND
2 :HOT ( + )
3 :COLD ( – )
2
CONNECTION
ASSIGNMENT
2
3
1 :GROUND
2 :HOT ( + )
3 :COLD ( – )
1
TA-E1
CD Player
Super Audio CD
Player
Audio component
with balanced
output jacks
Tape deck,
MD deck ,
(etc.)
Tape deck,
DAT deck ,
(etc.)