Filter
Top Products
11
GB
Location of Parts and Basic Operations
4 TAPE MONITOR button
Press to turn the tape monitor on and off. The
indicator lights when the tape monitor is on and goes
out when the tape monitor is turned off.
5 TAPE MONITOR input select button
When the TAPE MONITOR (4) is on, press to select
the input from the TAPE 1 or TAPE 2 input jacks. The
indicator lights to show which input is selected.
6 DIRECT button
Press to select the input connected to the DIRECT
input jacks. The indicator lights, and the source
component connected to the DIRECT input jacks takes
priority over the source component selected with the
INPUT SELECTOR control (3).
Press the DIRECT button again to return to the source
selected with the INPUT SELECTOR control.
7 VOLUME control
After turning on the component you selected, turn to
adjust the volume.
5
SACD
LINE 1
LINE 2
MD/TAPE 2
CD
BALANCED LINE
DAT/TAPE 1
4
3
2
TAPE MONITOR
TAPE 1
TAPE 2
DIRECT
1
0
6
7
8
9
10
VOLUME
INPUT SELECTOR
2 3 74 65
1