Filter
Top Products
15
EN
Additional Information
Specifications
Amplifier section
Power output
Australian model:
(FRONT)
DIN power output
80 W + 80 W (at rear/
centre/woofer off at
1 kHz, 8 ohms)
Continuous RMS power output
110 W + 110 W (at rear/
centre/woofer off at
1 kHz, 10% T.H.D.,
8 ohms)
Music power output
160 W + 160 W (at rear/
centre/woofer off,
8 ohms)
(REAR) 20 W + 20 W (at front/
centre/woofer off at
1 kHz, 8 ohms)
(CENTER) 30 W (at front/rear/
woofer off at
1 kHz, 8 ohms)
(WOOFER) 40 W (at front/rear/centre
off at 40 Hz, 4 ohms)
Other Countries model:
Peak music power output
1800 W (total)
(FRONT)
Continuous RMS power output
100 W + 100 W (at rear/
centre/woofer off at
1 kHz, 5% T.H.D.,
8 ohms)
(REAR) 20 W + 20 W (at front/
centre/woofer off at
1 kHz, 8 ohms)
(CENTER) 35 W (at front/rear/
woofer off at 1 kHz,
6 ohms)
(WOOFER) 40 W (at front/rear/centre
off at 40 Hz, 4 ohms)
Outputs
TONE
TAPE REC OUT, VIDEO
1: Voltage 250 mV,
Impedance 1 kilohms
PHONES: Accepts low
and high impedance
headphones
±8 dB at 100 Hz and
10 kHz
Inputs
Sensitivity
2.5 mV
400 mV
250 mV
Impedance
50
kilohms
50
kilohms
PHONO
CD
TAPE, VIDEO
1, 2, TUNER
General
Power
requirements
Power
consumption
AC outlets
Dimensions
Mass (Approx.)
Supplied
accessories
110 - 120/220 - 240 V AC,
50/60 Hz
220 W
3 switched,
total 100 W max.
430 x 160 x 355 mm
9.3 kg
Remote controller
(remote) (1)
Size AA (R6) batteries (2)
Design and specifications are subject to
change without notice.