Filter
Top Products
Receiver Operations
11
GB
Changing the factory setting of a
function button
If the factory settings of the FUNCTION buttons don’t
match your system components, you can change them.
For example, if you have two CD players and you don’t
have a tape deck or an MD recorder, you can assign
the MD/TAPE button to your second CD player.
Note that the settings of the TUNER button cannot be
changed.
1 Hold down the Function button whose function
you want to change (MD/TAPE, for example).
2 Press the corresponding numeric button of the
component you want to assign to the Function
button (1 - CD player, for example).
The numeric buttons are assigned to select the
functions as follows:
* Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control
a second CD player.
To reset the setting to the factory setting
Repeat the above procedure.
Numeric button
1
2
3
4
5
6
7
8
9
0
Enter
Operates
CD player
DAT deck
MD deck
Tape deck A
Tape deck B
LD player
VCR (remote control mode VTR 1*)
VCR (remote control mode VTR 2*)
VCR (remote control mode VTR 3*)
TV
DVD
1 Press one of the Function buttons to select the
component you want to use.
The Function buttons on the remote are factory-
set as follows:
If you want to change the factory setting of a
button, see the next section.
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
2 Start playing.
Refer to “Remote Button Descriptions” on page 24
for details.
To turn off the components
Press SYSTEM STANDBY. You can turn off the video and
audio components connected to the SWITCHED AC
OUTLET at the same time.
Note
Press SYSTEM STANDBY together with the TUNER button
to set SYSTEM STANDBY switch to turn only the receiver on
or off. Press SYSTEM STANDBY together with the 5.1 CH
button to return the SYSTEM STANDBY switch to normal
operation.
Function
buttons
Numeric buttons
To listen to or watch
Radio programmes
Compact discs (CD)
MiniDiscs (MD) or
audio tapes
TV programmes
VHS Video tapes
(VTR-3 mode)
DVD Player/AC-3 decoder
Press
TUNER
CD
MD/TAPE
(INITIAL-MD MODE)
TV
VIDEO
5.1 CH