Filter
Top Products
25
GB
Other Operations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
After pressing ALT (page 35), press
SLEEP while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
To specify the time freely
1 After pressing ALT (page 35), press SLEEP.
2 After pressing MAIN MENU (page 35), press
the V/v/B/b button to specify the time you
want.
The sleep timer changes in 1 minute intervals.
You can specify up to 5 hours.
Tip
To check the remaining time before the receiver turns
off, press SLEEP. The remaining time appears in the
display.
Other Operations
Adjustments using the
SET UP menu
The SET UP menu allows you to make the
following adjustments.
1 Press MAIN MENU repeatedly to select
the SET UP menu.
2 Move the V/v/B/b button up or down
to select the parameter you want to
adjust.
3 Move the V/v/B/b button to left or
right to select the setting you want.
4 Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
DVD-XXXX AUTO
TV-XXXX AUTO
x Audio input mode for DVD function
(DVD-XXXX)
Lets you select the audio input mode for DVD
function.
• “AUTO” gives priority to the analog audio
signals input to the DVD IN (L/R) jacks when
there is no digital audio signals.
• “COAX” specifies the digital audio signals
input to the DIGITAL DVD COAX input jacks.
• “OPT” specifies the digital audio signals input
to the DIGITAL DVD OPTICAL input jacks.
• “ANLG” specifies the analog audio signals
input to the DVD IN (L/R) jacks.
continued